chemical milling
英 [ˈkemɪkl ˈmɪlɪŋ]
美 [ˈkemɪkl ˈmɪlɪŋ]
n. 化学铣; 缩写词为CM
双语例句
- The chemical milling is a kind of surface treatment method, which can enable the figure-complicated and processing highly-precise parts to meet the processing requirement.
化铣是一种能使表面形状复杂、加工精度要求高的零件达到加工要求的表面处理方法。 - The entire switch without a moving contact surface has high explosion proof and waterproof function, meeting the requirement of chemical industries, coal mines, underwater, and milling working.
整个开关没有动接触面。所以具有较高的防爆防水性能。满足化工，煤矿、水下，制粉作业的要求。 - Effects of Coefficient of Corrosion on Long Crack Expansion after Chemical Milling
腐蚀系数对化铣表面长裂纹扩展影响的定量分析 - The series of ball mill is suitable for large architectural ceramic, sanitary porcelain, electric porcelain, metallurgy and chemical industry as milling wet grind materials equipment.
本系列球磨机主要用于大型建筑陶瓷、日用陶瓷、卫生陶瓷、电瓷、冶金、化工等行业作为湿法研磨物料用的一种大型球磨设备。 - Production technology for preparation of low apparent density flake silver power by chemical reduction and mechanical milling was studied, of which was established optimize condition of the main effect factors in every technology processing.
研究了化学还原-机械球磨制备电磁屏蔽用低松比片状银粉的生产工艺，确定了各工序主要影响因素的优化条件。 - The Mechanical and Chemical Effection in Milling Process of Ceramic Material
陶瓷原料细磨过程的机械力化学效应 - AgSnO_2 contact material is developed by chemical co-precipitation, high energy ball milling and powder sintering as well as hot extrusion.
利用化学共沉淀法及高能球磨工艺制备微米级Ag包覆SnO2复合粉末，然后采用冷等静压和烧结热挤压法制备AgSnO2材料。 - Furthermore, the proportion of nano-particles is much higher in the coating prepared by chemical-ball milling method.
因此，化学球磨法是制备纳米颗粒复合电镀液的比较理想方法。 - Development of Peelable Protective Coating of Chemical Milling
可剥性化铣保护涂料的研制 - Structure Design and Chemical Milling of Net shaped Strengthened Cylindrical Shell
LF6筒体内壁网格的结构设计及化铣加工 - Preparation of new chemical milling protective coating of aluminum alloy
新一代铝合金化学铣切保护涂料的研制 - This paper introduces the technological process of the chemical milling for manufacturing carbon steel die. Also design and analysis technical parameters for chemical milling.
本文介绍了化学铣切加工碳钢模具的工艺流程，设计和分析了化学铣切的工艺参数。 - The additive can improve the surface mass after chemical milling and increase the operating scope of aluminum ion.
添加剂可以改善化铁后表面质量，增加溶液中铝离子含量的使用范围.延长了溶液的使用寿命。 - Comparing with the other methods, such as supersonic method and chemical method, much more nano-particles are in nanometer scale in the composite solution after prepared by chemical-ball milling method.
与超声波分散方法和化学分散方法相比，化学球磨法处理后镀液中的纳米颗粒更多的处在纳米数量级，并可悬浮4小时。 - The peelable coating is produced with the basic materials of star-shaped SBS thermoplastic elastomers mainly surrounding the formation and character of the protective coating of chemical milling.
主要围绕化铣保护涂料的组成及特性，制备以星型SBS热塑性弹性体为基料的可剥性保护涂料。 - The project made studies on the manufacturing process of the bright nanometer Ag powder, and fixed the process route of chemical reduction-mechanical ball milling.
本项目对纳米光亮片状银粉的制备工艺进行了研究，确定了化学还原&机械球磨的工艺路线。 - The chemical milling process for 2219 aluminum alloy tube was investigated using orthogonal test and the optimum formula and technology were established.
对2219铝合金筒段的化学铣切工艺进行了研究，以确定化学铣切工艺的最佳配方和工艺控制要点。 - Chemical Milling Process of Ti-Foil
超薄钛箔化学铣切工艺研究 - Experiment proves that the characteristics of new protective coating of chemical milling of aluminum alloy basically approach those of products of the same kind made by the USA.
实验证明：研制的新一代铝合金化学铣切保护涂料基本达到美国同类产品的性能水平。 - Test results show that the design requirements of the spiral groove movable ring can be met with MEMS and chemical milling technology.
结果表明，采用标准MEMS光刻工艺技术和化学铣切工艺技术，可加工出满足设计要求的螺旋槽动环。 - The Application of Chemical Milling Polishing in IC Manufacturing Devices
化学研磨抛光技术在IC制造设备中的应用 - The contents introduced include oxidization unhairing, chrome tanning with high pH value, chemical modification of hide, powder coating for leather finishing, chemical milling and application of ultrasound in leather industry.
其中包括氧化脱毛、高pH值铬鞣、促进铬吸收的胶原改性、粉沫涂饰、化学摔软、超声波在制革工业中的应用等。 - Methods Processing the Zirconia Toughened Glass Infiltrated Nanometer-ceramic Composite ( Al 2O 3/ nZrO 2) Powder with combination of chemical co-precipitation method and Ball milling.
方法采用包裹共沉淀与湿法球磨相结合的方法合成Al2O3-nZrO2纳米复合陶瓷粉体。 - Hydrogen Absorption and Effect Occurred During Chemical Milling of Ti and Ti alloy
钛和钛合金化学铣切中的吸氢及其影响 - Chemical Milling Process for 2219 Aluminum Alloy Tube
铝合金筒段化学铣切工艺研究 - Methods of low heat solid phase coordination, chemical reaction, analytic purity ZnO surface modification, homogeneous precipitation, sol-gel, co-precipitation and solid milling are used to prepare ZnO catalysts.
用低热固相配位化学反应方法、分析纯ZnO表面改性、均相沉淀法、溶胶-凝胶法、并流沉淀法和固体研磨法6种方法制备了ZnO催化剂。 - Results of numerical examples by this method indicate that the weight of the structure to decrease by 17.3% as compared with that of the stiffened waffle cylindrical shell made by chemical milling under the same load.
用此方法计算的实例表明，采用机械铣网格结构与化铣网格结构相比，在相同载荷作用下，可以降低结构重量17.3%。 - As a kind of machine which is widely used in the industry, ball milling machine is widely used in mineral processing; building materials and chemical industry and so such. The ball milling machine industry is an important part of the building materials machine industry.
球磨机是工业生产中广泛使用的机械之一，被广泛用于选矿，建材及化工等行业，此行业是建材机械行业的重要组成部分。